Skip to main content
Fig. 7 | Maxillofacial Plastic and Reconstructive Surgery

Fig. 7

From: A simple technique for repositioning of the mandible by a surgical guide prepared using a three-dimensional model after segmental mandibulectomy

Fig. 7

Surgical procedure in case 2. a The surgical device was fixed on the mandible with the two screws each at the proximal segment and distal segment. b The mandibular resection was performed along the proximal and distal edges of the device fixed to the mandible. c After the pre-bent titanium reconstruction plate had been fixed on the proximal and distal segments with screws, the screws used to fix the surgical device were removed

Back to article page