Skip to main content
Maxillofacial Plastic and Reconstructive Surgery
Fig. 3 | Maxillofacial Plastic and Reconstructive Surgery

Fig. 3

From: Specially designed and CAD/CAM manufactured allogeneic bone blocks using for augmentation of a highly atrophic maxilla show a stable base for an all-on-six treatment concept: a case report

Fig. 3

Planning and designing process of the two CAD/CAM manufactured allogeneic bone blocks to fit exactly on an accurate defect model (J-shaped design): A, D, and G Defect geometry; B, E, and H Allogeneic bone blocks on the defect model; C and F Allogeneic bone blocks; and I Allogeneic bone blocks, including optimized subsequent implant positions

Back to article page